Aufsatz in einer Fachzeitschrift
Effect of temperature on cyclic deformation behavior and residual stress relaxation of deep rolled under-aged aluminium alloy AA6110



Details zur Publikation
Autor(inn)en:
Juijerm, P.; Altenberger, I.
Publikationsjahr:
2007
Zeitschrift:
Materials Science and Engineering: A
Seitenbereich:
475-482
Jahrgang/Band:
452
Erste Seite:
475
Letzte Seite:
482
ISSN:
0921-5093

Zusammenfassung, Abstract
Mechanical surface treatment (deep rolling) was performed at room temperature on the under-aged aluminium wrought alloy AA6110 (Al-Mg-Si-Cu). Afterwards, specimens were cyclically deformed at room and elevated temperatures up to 250 degrees C. The cyclic deformation behavior and s/n-curves of deep rolled under-aged AA6110 were investigated by stress-controlled fatigue tests and compared to the as-polished condition as a reference. The stability of residual stresses as well as diffraction peak broadening under high-loading and/or elevated-temperature conditions was investigated by X-ray diffraction methods before and after fatigue tests. Depth profiles of near-surface residual stresses as well as full width at half maximum (FWHM) values before and after fatigue tests at elevated temperatures are presented. Thermal residual stress relaxation of deep rolled under-aged AA6110 was investigated and analyzed by applying a Zener-Wert-Avrami function. Thermomechanical residual stress relaxation was analyzed through thermal residual stress relaxation and depth profiles of residual stresses before and after fatigue tests. Finally, an effective border line for the deep rolling treatment due to instability of near-surface work hardening was found and established in a stress amplitude-temperature diagram. (c) 2006 Elsevier B.V. All rights reserved.

Zuletzt aktualisiert 2019-01-11 um 16:04