Aufsatz in einer Fachzeitschrift
An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures
Details zur Publikation
Autor(inn)en: | Maier-Kiener, V.; Merle, B.; Göken, M.; Durst, K. |
Verlag: | CAMBRIDGE UNIV PRESS |
Publikationsjahr: | 2013 |
Zeitschrift: | Journal of Materials Research |
Seitenbereich: | 1177-1188 |
Jahrgang/Band : | 28 |
Heftnummer: | 9 |
Erste Seite: | 1177 |
Letzte Seite: | 1188 |
Seitenumfang: | 12 |
ISSN: | 0884-2914 |
DOI-Link der Erstveröffentlichung: |
Zusammenfassung, Abstract
The strain-rate sensitivity of ultrafine-grained aluminum (Al) and nanocrystalline nickel (Ni) is studied with an improved nanoindentation creep method. Using the dynamic contact stiffness thermal drift influences can be minimized and reliable creep data can be obtained from nanoindentation creep experiments even at enhanced temperatures and up to 10 h. For face-centered cubic (fcc) metals it was found that the creep behavior is strongly influenced by the microstructure, as nanocrystalline (nc) as well as ultrafine-grained (ufg) samples show lower stress exponents when compared with their coarse-grained (cg) counterparts. The indentation creep behavior resembles a power-law behavior with stress exponents n being similar to 20 at room temperature. For higher temperatures the stress exponents of ufg-Al and nc-Ni decrease down to n similar to 5. These locally determined stress exponents are similar to the macroscopic exponents, indicating that similar deformation mechanisms are acting during indentation and macroscopic deformation. Grain boundary sliding found around the residual indentations is related to the motion of unconstrained surface grains.
The strain-rate sensitivity of ultrafine-grained aluminum (Al) and nanocrystalline nickel (Ni) is studied with an improved nanoindentation creep method. Using the dynamic contact stiffness thermal drift influences can be minimized and reliable creep data can be obtained from nanoindentation creep experiments even at enhanced temperatures and up to 10 h. For face-centered cubic (fcc) metals it was found that the creep behavior is strongly influenced by the microstructure, as nanocrystalline (nc) as well as ultrafine-grained (ufg) samples show lower stress exponents when compared with their coarse-grained (cg) counterparts. The indentation creep behavior resembles a power-law behavior with stress exponents n being similar to 20 at room temperature. For higher temperatures the stress exponents of ufg-Al and nc-Ni decrease down to n similar to 5. These locally determined stress exponents are similar to the macroscopic exponents, indicating that similar deformation mechanisms are acting during indentation and macroscopic deformation. Grain boundary sliding found around the residual indentations is related to the motion of unconstrained surface grains.
